Osram SubstiTUBE 17 W 1700 lm T8 LED Tube Light, Cool White 4000K 840, G13 Cap, 244 V

  • RS Stock No. 110-9144
  • Mfr. Part No. 4058075024694
  • Manufacturer Osram
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Osram SubstiTUBE T8 Value EM ST8V LED Tubes

LED alternative made of glass for classic T8 fluorescent lamps in CCG luminaires. Quick, simple and safe replacement without rewiring. Ideal for use for areas that are illuminated over long periods of time like corridors, stairways and parking garages. These LED tubes are also ideal for use in cooling and storage rooms.

Suitable for operation with low-loss and conventional control gear.

Features and Benefits

Energy savings of up to 69% (compared to T8 fluorescent lamp on CCG)
Instant-on light, therefore ideally suitable for use with sensor technology
High resistance to switching loads
Also suitable for operation at low temperatures
No sagging thanks to glass technology
Suitable for cost-oriented lighting tasks
Especially uniform illumination
Lifespan up to 30000 hours
Mercury free and RoHS compliant
Type of protection: IP20
Colour rendering Ra: >80

Typical Applications

• Garage parking • Cooling and storage rooms
• Hospitality
• Logistics and Industry
• Residential
• Consumer
• Education
• Museums and Galleries


Why use LED lights?

LED lights are energy efficient. They are up to 80% more efficient than traditional lighting such as fluorescent and incandescent lights. 95% of the energy in LEDs is converted into light and only 5% is wasted as heat. Using less energy means the demand from power plants decreases there reducing greenhouse gas emissions. As compared to fluorescent tubes, the most important advantages of LED tubes are energy efficiency and long service life. They are also safer due to being cooler than incandescent lights and much more resistant to breakage. LEDs don’t have any flickering issues that can happen with fluorescent. Ultimately, the efficiency, long life, and functionalities of T8 LEDs make them worthy of potentially replacing standard T8 fluorescent tubes.

What are ballast compatible LED Tubes?

A ballast compatible tube is one where you can pull out the existing tube, leaving the ballast installed and fit the LED tube.

Do Ballast compatible tubes work with all ballasts?

No, they work with most electronic ballasts.

Attribute Value
Length Imperial 4ft
Length Metric 1200mm
Wattage 17 W
Lamp Size T8
Lamp Base G13
Colour Rendering 80%
Colour Reference 840
Colour Temperature 4000K
Colour Tone Cool White
Voltage Rating 244 V
Luminosity 1700 lm
Life Hours 30000h
EU Energy Efficiency Rating A+
Series SubstiTUBE
Discontinued product
Related Products
The Florence range of products is specifically designed ...
The Florence range of products is specifically designed for low and no-sunlight applications, maximising growth potential whilst minimising both initial purchase costs and on-going running costs. Florence is no deeper than a standard fluorescent tube fitting, so replacing fluorescent now ...
LED bulbs, compatible with all mains-powered light fittings.Energy ...
LED bulbs, compatible with all mains-powered light fittings.Energy capacity 3 x 1 W.Low energy consumption and reduced maintenance costs. Very economical thanks to their long lifespan.Ideal for closed display windows, niches, work surfaces, bookcases and also for marking and signing. ...
Bulbs controlled using an IR remote control for ...
Bulbs controlled using an IR remote control for selection of a multitude of colours and lighting modes (fixed, dimmed, stroboscopic, etc.).Long lifespan (10,000 hours) and low power consumption (5 W).
This range of IP20 LED lamps are ideal ...
This range of IP20 LED lamps are ideal replacements for high intensity discharge lamps (HPS & MH) in open fittings such as low bay and high bay fittings. High output Epistar LEDs360° Light output – no dark spotsIdeal as direct ...