RS PRO Red LED Strip 24V

  • RS Stock No. 136-3589
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

RS Pro Flexible LED Strips 24V IP65

RS Pro flexible LED strips are available in a variety of sizes and are suitable to cut at 10cm increments. Their small 10 x 3mm profile allow for a professional lighting solution that can be on show or easily hidden and at 24V are easily powered with a variety of small LED drivers. At 60 LEDs per meter, the consistent and even spacing provides a homogeneous light source for applications in both commercial and residential applications.

With a protective rating of IP65, this strip is suitable for indoor and outdoor use and is protected against low pressure water but is not submergible. This strip uses bright red 5050 SMD LEDs and have a 3M adhesive backing to aid installation.

Specifications
Attribute Value
LED Colours Red
Strip Length 5m
Voltage Rating 24V
Number of LEDs per Metre 60
IP Rating IP65
Typical Luminous Flux lm/m 600lm/m
Flexible/Rigid Flexible
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 599.54
units
Per unit
1 +
MYR599.54
Related Products
The LUXEON CoB Core (Gen 2) range from ...
Description:
The LUXEON CoB Core (Gen 2) range from Lumileds is their second generation of LUXEON CoB LEDs. They offer an additional 10% higher efficiency and lumen output. These Chip-on-Board (CoB) LEDs have a small light emitting surface (LES) with a ...
The LUXEON CoB Core (Gen 3) range from ...
Description:
The LUXEON CoB Core (Gen 3) range from Lumileds is their third generation of LUXEON CoB LEDs. They offer a higher efficiency and lumen output to previous generations. Their efficacies reach more than 150 lm/W (80CRI) and over 160 lm/W ...
Dragon3 Coin LED modules, from Intelligent LED Solutions ...
Description:
Dragon3 Coin LED modules, from Intelligent LED Solutions (ILS), are powerful and compact LED light sources. Utilizing 3 Osram Golden Dragon Plus LEDs built on a laminated PCB for optimum thermal management. The Dragon3 Coin series are available in a ...
The LZ1 Series LED modules feature a 5W ...
Description:
The LZ1 Series LED modules feature a 5W LED emitter mounted on LedEngin’s standard single channel MCPCB. The star MCPCB can be attached to a heat sink with M3 screws and has three sets of "+" (Anode) and "-" (Cathode) ...