Infineon ICL8002GXUMA1 LED Driver IC, -0.3 27 V 10mA 8-Pin

  • RS Stock No. 166-0885
  • Mfr. Part No. ICL8002GXUMA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

ICL8002G Off-line LED Driver IC

The Infineon ICL8002G is an offline LED driver IC part of the ICL series supporting dimming levels down to 1%. It is a highly integrated LED driver with primary side control that reduces the number of required components and simplifies design. A low-cost bleeder circuit supports great dimmer compatibility for mainstream single stage non-isolated buck or isolated flyback topologies. Typical applications are LED replacements lamps (e.g. A-bulb, linear tubes) or LED luminaires (e.g. downlights, spotlights).

Features

Supports single stage PFC/quasi resonant flyback and PFC/floating buck topology
Integrated HV start-up cell for short time to light
Comprehensive protection features
Optimised for phase-cut dimming compatibility
High efficiency up to 90%
Good line and load regulation capabilities
Power factor up to 98% with low THD (<20%)
Smooth dimming curve with high dimmer compatibility
Primary side control with high accuracy
Integrated power cell for short time to light
Built-in digital soft-start
Isolation Voltage: 1250 Vac to 3750 Vac
Operating Temp.: -40°C to +125°C

LED Drivers, Infineon

Specifications
Attribute Value
Output Current 10mA
Input Voltage -0.3 27 V
AC or DC Input Voltage Dc
Dimming Operation PWM
Application LED Luminaries, LED Replacements Lamps
Number of Pins 8
Maximum Output Voltage 27V
Minimum Output Voltage -0.3V
Current Rating 5mA
Series ICL
Temporarily out of stock - back order for despatch when stock is available
Price Each (On a Reel of 2500)
MYR 5.738
units
Per unit
Per Reel*
2500 +
MYR5.738
MYR14,345.00
*price indicative
Related Products
LYTSwitch-3 single-stage LED driver ICs with combined power ...
Description:
LYTSwitch-3 single-stage LED driver ICs with combined power factor correction and constant current outputs from Power Integrations. These devices incorporates a high-voltage power MOSFET and discontinuous mode, variable frequency, variable on-time controller integrated into a single chip. They can provide ...
BD9409F is a high efficiency driver for white ...
Description:
BD9409F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9409F has a boost DCDC converter that employs an array of LEDs as the light source. BD9409F has some protect functions against fault conditions, such ...
BD9411F is a high efficiency driver for white ...
Description:
BD9411F is a high efficiency driver for white LEDs and is designed for large LCDs. BD9411F has a boost DCDC converter that employs an array of LEDs as the light source. BD9411F has some protect functions against fault conditions, such ...
The ROHM BD9486F series is a high-efficiency LED ...
Description:
The ROHM BD9486F series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel. It has a boost DC-DC converter that employs an array of LEDs as the light source. This driver has some protective ...