STMicroelectronics HVLED001ATR, LED Driver, 13 V, 10-Pin SSO

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The HVLED001A is an enhanced peak current mode controller capable of controlling high power factor (HPF) flyback or buck-boost topologies in LED drivers that have an output power of up to 150 W. Other topologies, such as buck, boost and SEPIC, can also be implemented. STs innovative high voltage technology allows direct connection of the HVLED001A device to the input voltage to start up the device and to monitor the input voltage, without the need for external components.

Quasi resonant (QR) topologyOptimized output voltage accuracy at any load (PSR mode)Improved transient response and startup timeDirect optocoupler connection for current loop regulation with feedback disconnection detection800 V high voltage startupHigh power factor and low THD over wide range of input voltage and load variationsHigh efficiency and output stability over wide voltage and current rangeLow startup and quiescent currentProgrammable minimum off-time

Specifications
Attribute Value
Maximum Supply Current 3.15 mA
Mounting Type Surface Mount
Package Type SSO
Pin Count 10
Typical Operating Supply Voltage 13 V
Dimensions 5 x 4 x 1.5mm
Height 1.5mm
Length 5mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Width 4mm
Output Voltage 14.5 V
Temporarily out of stock - back order for despatch when stock is available
Price Each (On a Reel of 2500)
MYR 3.339
units
Per unit
Per Reel*
2500 +
MYR3.339
MYR8,347.50
*price indicative
Related Products
LED driver, Complementing the effciency of LED lamps, ...
Description:
LED driver, Complementing the effciency of LED lamps, Comprising a resistor-equipped PNP transistor with two diodes on one chip, our LED drivers come in small SOT23 and SOT457 plastic packages. High current accuracy and stabilized output currents of 10 – ...
The NCV7430 is a single-chip RGB driver intended ...
Description:
The NCV7430 is a single-chip RGB driver intended for dedicated multiColour LED applications. The RGB LED driver contains a LIN interface (slave) for parametric programming of LED Colour and intensity. The device receives instructions through the LIN bus and subsequently ...
A range of highly integrated dedicated high-current LED ...
Description:
A range of highly integrated dedicated high-current LED Driver ICs for use in lighting and display backlight applications.Linear Technology’s LED driver ICs are configured as Inductorless white LED drivers (parallel) or switching regulator based white LED drivers (series). The range ...
A range of highly integrated dedicated high-current LED ...
Description:
A range of highly integrated dedicated high-current LED Driver ICs for use in lighting and display backlight applications.Linear Technology’s LED driver ICs are configured as Inductorless white LED drivers (parallel) or switching regulator based white LED drivers (series). The range ...