ACPL-7900-000E Broadcom, Isolation Amplifier, 3 → 5.5 V, 8-Pin PDIP

  • RS Stock No. 922-6731
  • Mfr. Part No. ACPL-7900-000E
  • Manufacturer Broadcom
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3 → 5.5 V
Number of Channels per Chip 1
Maximum Voltage Gain 8.44V/V
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 9.8 x 6.35 x 3.56mm
Height 3.56mm
Width 6.35mm
Length 9.8mm
Maximum Operating Temperature +105 °C
Minimum Operating Temperature -40 °C
2600 In Global stock for delivery within 4 - 6 working days
Price Each (In a Tube of 50)
MYR 16.584
units
Per unit
Per Tube*
50 - 50
MYR16.584
MYR829.20
100 - 150
MYR16.294
MYR814.70
200 - 450
MYR14.912
MYR745.60
500 - 950
MYR14.839
MYR741.95
1000 +
MYR13.457
MYR672.85
*price indicative
Related Products
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, ...
Description:
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, T-, S-, R-, and E-Type0.25°C ResolutionDetects Thermocouple Shorts to GND or VCCDetects Open ThermocoupleInterfaces with simple SPI-Compatible Serial Interface (Read-Only) to Microcontrollers.
The operational amplifiers have low input offset voltage ...
Description:
The operational amplifiers have low input offset voltage and drift. They are ideal for power-sensitive sensor interface applications where precision and low-noise performance enable the input voltage to scale.