Texas Instruments USB-C Evaluation Module for TUSB320, TUSB320EVM

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TUSB320 USB Type-C Configuration Evaluation Module, Texas Instruments

The TUSB320 Evaluation Module is a Plug-and-Play design that can be configured with the DIP switch to operate in DFP, UFP, or DRP Type-C implementation mode. The DIP switch also selects any of the control inputs. The I²C serial interface or GPIO mode can be used for configuration.
The TUSB320 devices can be used with legacy USB systems or Type-C systems for evaluation purposes.

USB (Universal Serial Bus), Texas Instruments

Specifications
Attribute Value
Interface Function USB-C
Kit Classification Evaluation Module
Featured Device TUSB320
Price Each
MYR 398.27
units
Per unit
1 +
MYR398.27
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that ...
Description:
The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that utilizes the FT2232H USB Hi-Speed 2-port bridge chipThe FT4232H Mini-Module is a USB-to-Serial/MPSSE unit that utilizes the FT4232H USB Hi-Speed 4-port bridge chipThe IC handles all the USB signalling and protocolsIdeal for ...
The USB-UART LP Bridge Controller provides a single ...
Description:
The USB-UART LP Bridge Controller provides a single USB-to-UART interface channel, with low power consumption in stand-by mode.The CY7C65213 controller integrates Battery Charging Detection logic. The controller features up to 8-pins for Inputs/Outputs. USB-Serial Software Development Kit (SDK) available at ...
The Isolated RS232/RS485 Evaluation Kit is a demonstration ...
Description:
The Isolated RS232/RS485 Evaluation Kit is a demonstration and evaluation platform for creating Isolated RS232 and RS485 solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated ...