FTDI Chip Breakout Module ZigBee UMFT230XB-01 XBee
- RS Stock No.:
- 757-0067
- Mfr. Part No.:
- UMFT230XB-01
- Manufacturer:
- FTDI Chip
5 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR64.92
| Units | Per Unit |
| 1 + | MYR64.92 |
- RS Stock No.:
- 757-0067
- Mfr. Part No.:
- UMFT230XB-01
- Manufacturer:
- FTDI Chip
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
USB to I²C/UART/FT1248 Breakout Modules, FTDI Chip
Versions Available
(757-0054) UMFT201XB-01 - FT201XQ Breakout Board
(757-0067) UMFT230XB-01 - FT230XQ Breakout Board
This range of FTDI breakout boards are designed to convert USB to serial or parallel interfaces. The UMFT201XB-01 (757-0054) bridges USB to I²C and the UMFT230XB-01 (757-0067) bridges from USB to a UART IC.
(757-0054) UMFT201XB-01 - FT201XQ Breakout Board
(757-0067) UMFT230XB-01 - FT230XQ Breakout Board
This range of FTDI breakout boards are designed to convert USB to serial or parallel interfaces. The UMFT201XB-01 (757-0054) bridges USB to I²C and the UMFT230XB-01 (757-0067) bridges from USB to a UART IC.
The UMFT201XB bridges from USB to I²C two-wire serial bus interface
The UMFT220XB bridges from USB to Parallel 4-Bit FT1248 Interface
The UMFT230XB bridges from USB to Basic UART (Universal Asynchronous Receiver/Transmitter)
The breakout board converts USB 2.0 Full-Speed to a serial interface
Serial signals on a 2.54mm (0.1”) pitch 10-pin female connector
The module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector
The serial interface operate at +3.3V
Input/Output pins are 5V tolerant
The UMFT220XB bridges from USB to Parallel 4-Bit FT1248 Interface
The UMFT230XB bridges from USB to Basic UART (Universal Asynchronous Receiver/Transmitter)
The breakout board converts USB 2.0 Full-Speed to a serial interface
Serial signals on a 2.54mm (0.1”) pitch 10-pin female connector
The module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector
The serial interface operate at +3.3V
Input/Output pins are 5V tolerant
Specifications
Attribute | Value |
|---|---|
| Classification | Breakout Module |
| Kit Classification | Breakout Module |
| Technology | USB2.0 to Full Speed I2C with Four Control Bus Line |