FTDI Chip USB to UART Development Board for FT232RL, UM232R

  • RS Stock No. 406-568
  • Mfr. Part No. UM232R
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

UM232R USB to Serial UART Development Module, FTDI Chip

The UM232R module is a USB - Serial UART (TTL) development module for the FT232R IC device. The UM232R is supplied on a PCB designed to fit a 24 pin DIP socket, and provides access to all UART and CBUS interface pins of the FT232R device. The UM232R can be configured as either USB bus-powered or self-powered and also supports 5V or 3V level interface IOs via two sets of jumper setting pins. Full hardware handshaking is supported and the UM232R can communicate at up to 3MBaud at TTL/CMOS levels.

FTDI Chip USB To UART Development Board

The FTDI chip USB to UART development board is a development module that uses FTDI’s FT232RL, one of FTDI’s range of USB to UART interface integrated circuit devices. The FT232RL is a USB to serial UART interface with optional clock generator output and the FTDI Chip-ID security dongle feature. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be detached and used to drive a microcontroller or external logic. A unique number is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle that can be used to protect customer application software from being copied. The circuit is supplied on a PCB which is designed to plug into a standard 0.6in wide 24-pin DIP socket.

Features and Benefits

• Adjustable receive buffer timeout
• Entire USB protocol handled on the chip, no USB-specific firmware programming required
• Data transfer rates from 300 baud to 1 Mega baud
• High I/O pin output drive option
• In-built support for event characters and line break condition
• Integrated power-on-reset circuit
• Integrated USB resistors
• Integrated 1024 bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration
• Low operating and USB suspend current
• Low USB bandwidth consumption
• Operating temperature ranges between 40°C and 85°C
• Receive and transmit buffers for high data throughput
• Single chip USB to UART synchronous serial data transfer interface
• Single Supply Operating voltage ranges between 4.0V and 5.25V
• Transmit and receive LED drive signals

Applications

• PDA to USB data transfer
• USB Bar Code Readers
• USB Digital Camera Interface
• USB Hardware Modems
• USB Industrial Control
• USB Instrumentation
• USB Medical applications
• USB MP3 Player Interface
• USB Smart Card Readers
• USB Software/Hardware Encryption Dongles
• USB Wireless Modems

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Development Board
Featured Device FT232RL
391 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 81.80
units
Per unit
1 +
MYR81.80
Related Products
Texas Instruments MSP-TS430PW24 is a standalone ZIF socket ...
Description:
Texas Instruments MSP-TS430PW24 is a standalone ZIF socket target board used to program and debug the MSP430 in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol. The development board supports all MSP430AFE2xx Flash parts in a 24-pin ...
LIN is a small, serial, slow, and cheap ...
Description:
LIN is a small, serial, slow, and cheap bus system. LIN is based on one master node and a number of LIN slaves (up to 16). It is a low-cost concept for automobile networks, for which it standardizes the transmission ...
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Matrix RGB click is a 16x32 RGB LED controller board incorporating a 32-bit FT900 microcontroller. A 16-way IDC connector on the board allows connection to a single ...
The MikroElektronika MRAM click board features MRAM module ...
Description:
The MikroElektronika MRAM click board features MRAM module contains 262, 144 magnetoresistive memory cells, organized into 32, 768 bytes of memory. Thus, MRAM click is a memory storage device with 32kb memory space. The module can withstand an unlimited number ...