Megger MIT410 2, Insulation Tester 200GΩ CAT IV 600 V

  • RS Stock No. 921-4514
  • Mfr. Part No. 1004-735
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Megger MIT 410 mk2 Series Insulation & Continuity Testers

Meggers MIT410/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.

All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.

Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.

Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)

Standards

IEC1010, HD384 and BS EN 61557

Supplied with

Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries

Megger Insulation and Continuity Testers

The Megger MIT410/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range is added to allow any intermediate voltage between 50V and 1000 V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges. It supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries

Features and Benefits

• Insulation testing up to 1000V and 200Gohm range
• Polarisation index, dielectric absorption ratio, variable test voltage and result storage
• Stabilised insulation test voltage (New)
• Single range, faster continuity testing between 0.01ohm and 1Mohm (New)
• 600V TRMS AC and DC voltage measurement
• Live circuit detection and protection
• User variable insulation test voltage between 100V and 1000V (New) depending on model
• Test result storage and Bluetooth® downloading depending on the model
• Rechargeable options for mains and car charging (New) depending on the mode

Applications

• Industrial sites
• Cable testing
• Motor testing
• Automotive
• ESD
• Panel building
• Avionics
• Maintenance activities

Certifications

• CAT IV 600V
• IP54 rated

Specifications
Attribute Value
Tester Type Insulation Tester
Minimum Test Voltage 10V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 200GΩ
Display Type Analogue, Dual Digital
Test Current 205mA
Battery Life 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT IV
Safety Category Voltage 600V
Safety Category CAT IV 600 V
Width 50mm
Battery Type Alkaline
Length 92mm
Model Number p MIT410 2
Height 220mm
Weight 775g
Dimensions 92 x 50 x 220mm
10 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,766.75
units
Per unit
1 +
MYR2,766.75
Related Products
The IN2101 is a compact, hand held electrical ...
Description:
The IN2101 is a compact, hand held electrical insulation tester which performs fast and accurate testing at 500 V with automatic discharge after test. Manufactured from durable ABS, the IN2100 Series electrical insulation testers are designed to withstand the toughest ...
A portable digital flash tester incorporating an electronically ...
Description:
A portable digital flash tester incorporating an electronically controlled variable test voltage and safety flash probe, suitable for testing to 17th Edition Regulations (BS7671). Selectable 120/240V, 50/60Hz operationIncorporates a solid state regulator to give stepless voltage adjustment, with safety zero ...
The DT-500 checks insulation resistance for systems or ...
Description:
The DT-500 checks insulation resistance for systems or devices.A 500 V measuring voltage delivered by the device is used to perform this check (in compliance with NF C15-100).Phase / neutral shunt function.Battery-saving function.Live voltage indicator and battery status indicator.Belt clip ...
A range of insulation testers that meet the ...
Description:
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue ...