Megger MIT2500, Insulation Tester 200GΩ
- RS Stock No. 122-6801
- Mfr. Part No. 1006-767
- Manufacturer Megger
MIT2500 Insulation Tester
MIT2500 insulation & continuity tester has been designed for the Electrical and Industrial test applications. Where operation voltages exceed 1000 V and higher insulation test voltages are needed.
The tester offers both fixed range voltages of 50 V, 100 V, 250 V, 500 V, 1000 V and 2500 V. And a variable range that allows any voltage between 50 V and 2500 V to be "dialled in".
MIT2500 features a redesigned case, back-stand and 6 cell battery compartment. It also offers a guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages.
Insulation testing up to 2.5 kV and 200 GΩ range in a hand held instrument
Guard terminal for high-resistance accuracy
Adjustable insulation test voltage from 50 V to 2500 V
Stabilised insulation test voltage
Single range, faster continuity testing from 0.01 Ω to 1 MΩ
Live circuit detection and protection
CAT IV 600 V applications
New case design with optional magnetic hanging strap
IP54 Rated
ABS housing
Standards
IEC 61010 & EN61557
Supplied with
2.5 kV rated test leads fitted with medium size crocodile clips and 1 kV rated test leads with probes and clips
Megger Insulation and Continuity Tester
The Megger MIT2500 insulation and continuity tester offers both fixed and variable voltages, which ranges up to 2500V. This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test. It uses the redesigned case, back-stand and six-cell battery compartment, as well as incorporating a guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages.
Features and Benefits
•
Insulation testing up to 2.5 kV and 200 Gohm range in a handheld instrument
• Guard terminal for high resistance accuracy
• Adjustable insulation test voltage from 50 V to 2500 V
• Stabilised insulation test voltage
• Rechargeable options for mains and car charging
• Single range, faster continuity testing from0.01 ohm to 1 Mohm
• Polarisation Index (PI) and Dielectric Absorption Ratio (DAR)
Applications
• Domestic sites
• Commercial sites
• Industrial sites
Certifications
•
IP54 rated
• CAT IV 600V
• IEC 61326
• EN 61010-1:2010
• EN 61010-2-030:2010
| Attribute | Value |
|---|---|
| Tester Type | Insulation Tester |
| Maximum Insulation Resistance Measurement | 200GΩ |
| Battery Life | 3000 5-Second Tests |
| Power Source | Battery |
| Safety Category Level | CAT IV |
| Battery Type | AA |
| Model Number p | MIT2500 |
