BALLUFF, M8 x 1, NO Inductive Sensor 40mm Length, 10 → 36 V dc supply voltage , IP66, IP67 Rating

  • RS Stock No. 124-3771
  • Mfr. Part No. BES M08MG-USC20B-BV03
  • Manufacturer BALLUFF
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

BES 2-Wire M8 Inductive Proximity Sensors

This range of M8 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments.

Pre cabled or connector Flush shielded or non-flush unshielded
2 wire DC configuration

Specifications
Attribute Value
Body Style Barrel
Thread Size M8 x 1
Output Type NO
Detection Range 2 mm
Terminal Type Cable
Supply Voltage 10 → 36 V dc
Length 40mm
Maximum DC Voltage 36V
Mounting Type Flush Mount
Switching Current 100 mA
IP Rating IP66, IP67
Housing Material Brass
Standards Met CE, CULus, EAC, IEC 60947-5-2
Maximum Switching Frequency 1.5kHz
Minimum Operating Temperature -25°C
Reverse Polarity Protection Yes
Short Circuit Overload Protection Yes
Maximum Operating Temperature +70°C
Shielding Shielded
13 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 206.94
units
Per unit
1 +
MYR206.94
Related Products
Linear power supplied with continuously adjustable regulated outputsUnits ...
Description:
Linear power supplied with continuously adjustable regulated outputsUnits are fully enclosed in a metal caseAll units are CE marked and manufactured in accordance with EN60950230Vac ± 10% (50/60Hz) input0 to 30°C operating temperature rangeSuitable for powering a wide range of ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
The AN8 series of angular position sensors from ...
Description:
The AN8 series of angular position sensors from Cherry are operated by a magnetic actuator near to the face of the sensor. These programmable magnetic position sensors are suitable for various applications including the replacement for smart bearings, pedal position ...