Advance Tapes AT8 Black/Yellow PVC 33m Hazard Tape, 75mm x

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Hazard Warning Tapes

Hazard warning tapes help to meet statutory health and safety regulations. The colours are used for marking as indicated below.,Black/Yellow:,Radio active substances, width and height ,restrictions, moving equipment and obstructions,Red/White:,Fire fighting equipment, no smoking areas and flammable substances,Green/White:,Safety equipment, first aid points, emergency escape routes and safe areas

A low stretch PVC that will not shrink back or lift once applied
Very high adhesion level, adheres well long term to rough surfaces
Good abrasion resistance, stands up well to foot and machinery traffic
Flexible and easy to apply round irregular surface
Roll length 33m
Widths vary (see table)
For indoor and outdoor use

Advance Tapes PVC Hazard Warning Tape

The Advance Tapes hazards warning tape is a black/yellow colour, heavy-duty plasticised PVC film coated with a white, aggressive pressure-sensitive and rubber resin adhesive. This tape is 0.14mm thick, 75mm wide and 33m long. The black/yellow colours indicate radioactive substances, width and height, restrictions, moving equipment and obstructions.

Features and Benefits


Low stretch PVC that will not shrink back or lift once applied
• High adhesion level, adheres well long term to rough surfaces
• Good abrasion resistance, stands up well to foot and machinery traffic
• Flexible and easy to apply round irregular surface
• Breaking load is 26N/cm
• Elongation at break 150%
• Excellent conformability, particularly to uneven surfaces
• Non-corrosive adhesive
• Can be applied by hand or machine
• Can be walked on immediately after application

Applications


Statutory health and safety regulations
• Indoor and outdoor use

Specifications
Attribute Value
Colour Black/Yellow
Backing Material PVC
Width 75mm
Length 33m
Thickness 0.14mm
Pre-printed None
Adhesion Strength 3.5 N/cm
Tensile Strength 26N/cm
Elongation at Break 150%
Maximum Operating Temperature +60°C
Minimum Operating Temperature 0°C
Adhesive Material Rubber Resin
Model Number AT8
250 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 97.42
units
Per unit
1 +
MYR97.42
Related Products
The Velcro One-Wrap continuous hook and loop tape ...
Description:
The Velcro One-Wrap continuous hook and loop tape is flame retardant certifiable, suitable for cabinets and ’Plenum’ air spaces. This tape is 20mm wide and 10m long. Note:Velcro is a registered trademark of Velcro BVBA. Used with permission. Flame retardantPolyethylene ...
A heavy duty plasticised PVC film coated with ...
Description:
A heavy duty plasticised PVC film coated with a white and aggressive cross – linked solvent based rubber – resin adhesive. Excellent conformability, particularly to uneven surfaces Specially formulated PVC prevents lifting Water resistant Good abrasion resistance UV resistant Very ...
Thin film PVC tape for the temporary protection ...
Description:
Thin film PVC tape for the temporary protection of anodized or acrylic coated metal parts, printed circuit boards, chromed and plated surfaces and stainless steel finishesUV resistant adhesiveBreaking load 23N/cmElongation 150%Adhesion to steel 0.30N/cm.
Heavy duty PVC film coated with an anti-corrosive, ...
Description:
Heavy duty PVC film coated with an anti-corrosive, aggressive adhesive. UV resistantHigh abrasion resistanceFlame retardantSelf-extinguishingFlexible and conformable to awkward shapesWater resistantNon-corrosive adhesiveHeavy dutyUseable as corrosion and abrasion protection for pipework above or under ground.