Kubler Analogue Hall Effect Sensor switching current 40 mA supply voltage 10 → 30 V dc

  • RS Stock No. 179-7734
  • Mfr. Part No. 8.IN81.2411.121
  • Manufacturer Kubler
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

The inclinometers of the IN81 series allow measuring 2-dimensional inclinations in the range of ±85° or 1-dimensional inclinations up to 360°.With their high robustness, their high protection level and their wide temperature range from -40°C to +85°C, these devices are ideally suitable for outdoor use – e.g. for mobile automation applications.

Stable accuracy over a wide temperature range from -40°C up to +85°C.
High shock resistance up to 100 g and vibration resistance up to 10 g.
Versatile:
Parameterizable filter.
Measuring direction 1- or 2-dimensional.
With 1 x M12 connector or 2 x M12-connector.
Stacked installation possible for redundancy.

Specifications
Attribute Value
Output Type Analogue
Supply Voltage 10 → 30 V dc
Maximum DC Voltage 10 → 30V
Switching Current 40 mA
Switching Frequency 0.1 → 10 Hz
Length 80mm
Width 60mm
Depth 23mm
Dimensions 80 x 60 x 23 mm
Maximum Operating Temperature +85°C
Reverse Polarity Protection Yes
Minimum Operating Temperature -40°C
Housing Material Aluminium
IP Rating IP67, IP69K
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,518.93
units
Per unit
1 +
MYR1,518.93
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Sick TMM55 series inclination sensors use capacitive MEMS ...
Description:
Sick TMM55 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. A simple 4-hole mounting and M12 male connector on the cable outlet offers ...
Hall-effect sensor for detecting the proximity of a ...
Description:
Hall-effect sensor for detecting the proximity of a magnetic field.The magnetic field may be generated either by a permanent magnet or by an electromagnetic field.Robust aluminium threaded cylindrical housing that can be easily integrated into a tapped hole.Digital output with ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...