Honeywell Digital Hall Effect Sensor switching current 1 mA supply voltage 6.6 → 12.6 V dc

  • RS Stock No. 169-7651
  • Mfr. Part No. SS94A1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

LOHET IC’s

Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed.

Three-pin in-line PCB terminals, 0.1in spacing
Laser trimmed thin and thick film resistors
-40 to 125°C operating range

Specifications
Attribute Value
Output Type Digital
Supply Voltage 6.6 → 12.6 V dc
Terminal Type Solder Tag
Switching Current 1 mA
Length 7.6mm
Width 15.2mm
Depth 1.8mm
Dimensions 7.6 x 15.2 x 1.8 mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Temporarily out of stock - back order for despatch 02/07/2020, delivery within 4 working days from despatch date
Price Each (In a Bag of 1000)
MYR 206.95
units
Per unit
Per Bag*
1000 +
MYR206.95
MYR206,950.00
*price indicative
Related Products
ABS housingOpen collector PNP + NPN OutputNormally open ...
Description:
ABS housingOpen collector PNP + NPN OutputNormally open contact with bounce free operationLED indication of alignment and diagnosisSpecified magnet assembly must be used with this sensorSealed to IP65Cable length 145mmDimensions 32 x 24 x 10 mm.
Ifm electronic JN Series 2-axis inclination sensors are ...
Description:
Ifm electronic JN Series 2-axis inclination sensors are designed for high measurement accuracies over the whole angular range. An active temperature compensation and high protection rating ensures that they operate reliably at extreme temperatures and rough environments. Configurable via IO-Link ...
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally ...
Description:
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via 2 metre PUR cable or via M8 screwed connector, axial output.
M12 inductive detector, non flush-mountable."Normally open" PNP switching ...
Description:
M12 inductive detector, non flush-mountable."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via M12 screwed connector, axial output.