Sick Analogue Inclination Sensor switching current 45 mA supply voltage 11 30 V dc

  • RS Stock No. 136-9181
  • Mfr. Part No. TMM55E-PMH045
  • Manufacturer Sick
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

TMM55 Series Non-Contact Inclination Sensors

Sick TMM55 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. A simple 4-hole mounting and M12 male connector on the cable outlet offers a great deal of flexibility when mounting the sensor. With the rugged and UV-resistant plastic housing, the TMM55 inclination sensors are also ideally suited to outdoor use. Inclination angle is transmitted via analogue current or voltage signals.

Features and Benefits

Compact, two-dimensional inclination sensor Fixed measuring ranges: ±10°, ±45°, ±60°
Resolution as low as 0.01°
Compact and easy-to-mount
ABS plastic housing
IP67 rated
Fully encapsulated electronics

Sick Inclination Sensors

Specifications
Attribute Value
Output Type Analogue
Body Style Block
Mounting Style Screw Mount
Supply Voltage 11 30 V dc
Terminal Type 5-Pin M12 Male Connector
Maximum DC Voltage 30V
Detection Range ±45 °
Switching Current 45 mA
Switching Frequency 18 Hz
Length 62mm
Width 32.3mm
Depth 18.7mm
Dimensions 62 x 32.3 x 18.7 mm
Reverse Polarity Protection Yes
Maximum Operating Temperature +80°C
Standards Met EN 60068-2-27, EN 60068-2-6, EN 61326-1, EN ISO 13309, EN ISO 14982, IEC 60529
Short Circuit Overload Protection Yes
IP Rating IP65, IP67
Housing Material ABS
Minimum Operating Temperature -40°C
Response Time 75 ms
2 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR795.52
MYR 692.46
units
Per unit
1 +
MYR692.46
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The inclinometers of the IN81 series allow measuring ...
Description:
The inclinometers of the IN81 series allow measuring 2-dimensional inclinations in the range of ±85° or 1-dimensional inclinations up to 360°.With their high robustness, their high protection level and their wide temperature range from -40°C to +85°C, these devices are ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet fieldSingle current sinking or current sourcing linear outputRail-to-rail operation provides more useable signal for higher accuracyResponds to either positive or negative gaussGood temperature stabilityTypical ...
Hall-effect sensor for detecting the proximity of a ...
Description:
Hall-effect sensor for detecting the proximity of a magnetic field.The magnetic field may be generated either by a permanent magnet or by an electromagnetic field.Robust aluminium threaded cylindrical housing that can be easily integrated into a tapped hole.Digital output with ...