2SS52M Honeywell,, Omnipolar Hall Effect Sensor, 3.8 30 V dc, 3-Pin U-Pack

  • RS Stock No. 368-3945
  • Mfr. Part No. 2SS52M
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Series 2SS omnipolar magnetoresistive sensors

These magnetoresistive sensors are around ten times more sensitive (in range) than classic Hall effect sensors, in the direction parallel to the magnetoresistive element.
Their omnipolar characteristics allow activation of the sensor by a north or south pole.

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 0.4 mT
Maximum Magnetic Sensor Operating Point 2.5 mT
Minimum Operating Supply Voltage 3.8 V dc
Maximum Operating Supply Voltage 30 V dc
Length 4.52mm
Width 1.57mm
Height 4.52mm
Dimensions 4.52 x 4.52 x 1.57mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type U-Pack
Typical Magnetic Sensor Hysteresis 0.8 mT
1153 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 15.98
units
Per unit
1 - 9
MYR15.98
10 - 49
MYR13.49
50 +
MYR12.47
Related Products
A Hall-effect sensor switch from IXYS suitable for ...
Description:
A Hall-effect sensor switch from IXYS suitable for low-power low-voltage applications. On-chip power management circuitry reduces the effective average current to just 5uA at 3V making the device ideal for portable devices. The MX887D is an omnipolar device and switches ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
Analog Devices ADA4571BRZ is an Anisotropic Magnetoresistive (AMR) ...
Description:
Analog Devices ADA4571BRZ is an Anisotropic Magnetoresistive (AMR) Sensor with an integrated signal conditioning amplifiers and ADC drivers. This AMR sensor produces two analog outputs that show the angular position of the surrounding magnetic field.Applications:Absolute position measurement (linear and angle) ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...