Si7201-B-04-IVR Silicon Labs,, Omnipolar Hall Effect Sensor, 3-Pin SOT-23

  • RS Stock No. 144-6543
  • Mfr. Part No. Si7201-B-04-IVR
  • Manufacturer Silicon Labs
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Si720x Series Hall Effect Magnetic Sensors

A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, and the range includes versions with a tamper indication facility. Typical applications include security system magnetic detection, position sensing and revolution counting.

• Industry-leading sensitivity allows use with larger air gaps and smaller magnets
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Unipolar switching and Latch versions available
• Compact 3-pin SOT23 package
• AEC-Q100 Qualified for automotive applications

The Si720x family of Hall effect magnetic sensors and latches from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13- bit analog-to-digital converter, and flexible comparator circuit. The Si720x family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall effect sensors, the Si720x family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets.

High-Sensitivity Hall Effect Sensor
Maximum BOP operating point/minim
field strength of <1.1 mT
Omnipolar or unipolar operation
Sensitivity Drift < ±3% over Temperatur
Selectable Output Options
Open-drain output
Digital high/low output
2-wire current source

Hall Effect Sensors, Silicon Labs

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point ±0.2 mT
Maximum Magnetic Sensor Operating Point ±1.4 mT
Minimum Operating Supply Voltage 1.7 V
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Width 1.6mm
Height 1.15mm
Dimensions 2.9 x 1.6 x 1.15mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOT-23
Automotive Standard AEC-Q100
Typical Magnetic Sensor Hysteresis 0.4 mT
2795 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
MYR 5.56
units
Per unit
Per Pack*
5 +
MYR5.56
MYR27.80
*price indicative
Related Products
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
Current sensing package with flip-chip technology3000 Vrms galvanic ...
Description:
Current sensing package with flip-chip technology3000 Vrms galvanic isolationHigh accuracy over temperatureTypical output error of 1%.
Magnetoresistive circuits, single axis and double axis comprising ...
Description:
Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branchesCreate a compensation field to eliminate an unwanted field (offset+, offset-)Can be re-initialised in the event of driftMeasure movement or angular or linear positionsHighly sensitive ...
These magnetoresistive sensors are around ten times more ...
Description:
These magnetoresistive sensors are around ten times more sensitive (in range) than classic Hall effect sensors, in the direction parallel to the magnetoresistive element.Their omnipolar characteristics allow activation of the sensor by a north or south pole.