MikroElektronika MIKROE-1585, OLED C click 1.1in OLED Display Add On Board With SEPS114A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

OLED C click mikroBUS™

The OLED C click mikroBUS™ is an add-on board that allows you to add an OLED colour display to your design.

Features of the OLED C click
•mikroBUS™ pinout standard
•Passive matrix colour OLED display
•SEPS114A display driver and controller IC with built-in screen-saver, programmable panel size and power save mode functionality plus much more..
•Can display over 65k colours
•Wide viewing angle
•19.8 x 19.8 mm
•96 x 96 px resolution
•Suitable for 3.3 V power supply
•Power saving

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Display & Graphics Boards

Specifications
Attribute Value
Diagonal Display Size 1.1in
Display Technology OLED Display
Kit Classification Add On Board
Kit Name OLED C click
Featured Device SEPS114A
54 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 118.61
units
Per unit
1 - 9
MYR118.61
10 +
MYR118.49
Related Products
The Click accessory modules plug into the mikroBUS™ ...
Description:
The Click accessory modules plug into the mikroBUS™ sockets in MikroElektronika microcontroller development boards. Color click™ offers a solution of adding colour sensing to your design. The accessory board features an RGB LED diode and the TCS3471 colour light sensor. ...
The Click accessory modules plug into the mikroBUS ...
Description:
The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. The RS485 Click 3.3 V accessory board is designed for balanced data transmission with a 3.3V power supply. It has an on-board SN65HVD12 differential line transceiver ...
GEMMA is a tiny wearable platform built on ...
Description:
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB. This, the ...
WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 ...
Description:
WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided ...