Bridgetek CleO50A, CleO 5in Resistive Touch Screen Arduino Shield With 2 x MikroBus Slots

  • RS Stock No. 126-1742
  • Mfr. Part No. CleO50A
  • Manufacturer Bridgetek
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CleO 5.0in Touchscreen LCD for Arduino

The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip.

5.0in 800 x 480pixel TFT LCD panel with resistive touchscreen
Landscape and portrait modes supported
Anti-Aliased graphics throughout for much finer image quality
Smooth animations at up to 60fps
Direct file transfers between microSD/eFlash and Graphics subsystem without using Host processor resources
FT812 Embedded Video Engine (EVE) graphic controller
FT900 32-bit microcontroller
MicroSD card socket
8MB eFlash memory
Real-Time Clock with battery back-up
USB DFU port for firmware updates
Camera interface via 24-pin 0.5mm pitch FFC/FPC, bottom-contact connector
Support for OmniVision OV2640 camera module or CleO-CAM1A camera
PWM audio supported with speaker amplifier
I²S and CAN bus interfaces
Headers for 2 x MikroBUS modules
CR1220 coin cell holder for battery back-up
Ready to use in a panel mountable bezel
Operating temperature range: -20 to +70°C

Compatible Accessories
110-9118 NerO-LP1 Energy-efficient Arduino-format processor board
124-1039 CleO-CAM1 5Mpixel camera
124-1040 CleO-RIO1 Reverse-I/O pins Adapter Shield
124-1041 CleO-SPK1 0.5W Speaker
124-1042 MS-C6-8G MicroSD Flash card, 8GB, Class 6

Approvals

CE FCC

Specifications
Attribute Value
Diagonal Display Size 5in
Display Technology Resistive Touch Screen
Kit Classification Arduino Shield
Kit Name CleO
Featured Device 2 x MikroBus Slots
8 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 613.50
units
Per unit
1 +
MYR613.50
Related Products
The starter kit SK-gen4-28DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-28DT-PI from 4 D Systems is intended for the Raspberry Pi (see 896-8660). The Kit offers an integrated 2.8” display module with accessories. The Gen4-28DT-PI uLCD module has a resistive touch display and it helps you explore ...
The Starter kit SK-gen4-70D-PI from 4 D Systems ...
Description:
The Starter kit SK-gen4-70D-PI from 4 D Systems is for use with Raspberry Pi (RS 896-8660). The Kit offers a Diablo16 integrated 7 in display module with some accessories. The Gen4 module has a non-touch display letting you explore the ...
The 4D Systems Gen4 display module starter kit ...
Description:
The 4D Systems Gen4 display module starter kit is a 2.4in integrated colour TFT LCD with resistive touch powered by the well-known 4D systems Picaso graphics processor, which offers an array of functionality and options for designer users. The operating ...
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development ...
Description:
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development kit for high-performance, high-reliability and energy efficient serial F-RAM devices.The CY15FRAMKIT-001 kit has been designed to operate with the Arduino UNO R3 board with stackable connectors. Compatible with CY8CKIT-042, CY8CKIT-042-BLE and ...