XY2-CE Cable Switch, Right Side, 50m, 2NC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

Specifications
Attribute Value
Range Preventa
Series XY2-CE
Reset Button Yes
Normal State Configuration 2NC
Mounting Orientation Right Side
Maximum Rope Span 50m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Number of Cable Entries 1
Conduit Entry PG13.5
Size of Cable Entries PG13.5
Length 142mm
E-Stop Button No
Maximum Operating Temperature +70°C
Dimensions 142 x 229 x 105 mm
Depth 105mm
Width 229mm
Minimum Operating Temperature -25°C
IP Rating IP65
1 Within 4 working day(s) (Global stock)
3 Within 4 working day(s) (Global stock)
Price Each
MYR 818.71
units
Per unit
1 +
MYR818.71
Related Products
The Bernstein AG 616 series single pedal, momentary ...
Description:
The Bernstein AG 616 series single pedal, momentary contact emergency stop foot switch has double normally open and single normally closed as normal state configuration. It is red and made of aluminium. This foot switch has a rated insulation voltage ...
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of ...
The PSENrope from Pilz is a manually operated ...
Description:
The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors. It provides maximum safety, as the emergency stop function can be triggered at ...
The 3SE7 series of grab wire switches (trip ...
Description:
The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.As the effective range of a grab wire switch is only limited by the ...