Amber Glue Stick

  • RS Stock No. 896-2274
  • Mfr. Part No. 7718-12-250-ARP-TP10-RS
  • Manufacturer Power Adhesives
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Techbond 7718 Hot Melt Glue

This synthetic polymer-based hot melt glue has a low viscosity that sets very hard, making it ideal for potting, encapsulation and wood or knot repair.
Tested for use in electrical and electronic applications, Techbond 7718 complies with the UL-V0 flammability rating. Use of hot melt glue helps to speed up assembly with no mixing required. In addition, there is less wastage as unused adhesive is retained in the glue gun ready for the next use.

Applications

Potting
Encapsulation
Wood repair
Knot filling

Specifications
Attribute Value
Glue Type Glue Sticks
Product Form Stick
Colour Amber
Cure Time < 5
Viscosity Low
Minimum Operating Temperature -10°C
Maximum Operating Temperature +135°C
8 In Global stock for delivery within 4 - 6 working days
Price 1 Lot of 10
MYR 73.71
Lot(s)
Per Lot
Per unit*
1 - 5
MYR73.71
MYR7.371
6 - 11
MYR72.29
MYR7.229
12 +
MYR71.49
MYR7.149
*price indicative
Related Products
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
One part water resistant synthetic resin emulsion adhesive ...
Description:
One part water resistant synthetic resin emulsion adhesive for general bonding of wood assemblies for non-structural applications. Suitable for internal and protected external applicationsNot suitable for assemblies immersed in water or where there is a continuous static building load.
The overtec system (also known as Over-Moulding) is ...
Description:
The overtec system (also known as Over-Moulding) is a low-pressure moulding process that uses thermoplastic moulding resin to achieve high quality sealing and protection of components, faster than 2 component potting resins and far lower capital cost than injection moulding. ...
Transparent hot-melt adhesive for larger areas, solvent-free, 600 ...
Description:
Transparent hot-melt adhesive for larger areas, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 300 and GluePRO 400 LCD, temperature: 190°C, firm after 60 - 80 seconds, strong bond after approx. 100 - 120 seconds. With its long ...