Clear Glue Stick

  • RS Stock No. 896-2271
  • Mfr. Part No. 239-12-300-DRP-TP16-RS
  • Manufacturer Power Adhesives
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Techbond 239 Hot Melt Glue

This synthetic polymer-based hot melt glue is a great general purpose adhesive which is exceptionally clear. This high viscosity liquid glue is ideal for porous foams or fabrics and is an excellent gap filler.

Applications

Wood
Paper
Card
Foam
Fabric

Power Adhesives Glue Stick

The Power Adhesives clear glue stick is an exceptionally economical general purpose adhesive. Each stick has a length of 300mm and a diameter of12mm. It is a synthetic, polymer-based, hot melt, a general-purpose adhesive that is exceptionally clear.

Features and Benefits

• Excellent gap filler


High viscosity of 18,000cps
• Medium open time

Applications


Wood
• Paper
• Card
• Foam
• Fabric

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specifications
Attribute Value
Colour Clear
Diameter 12mm
Length 300mm
301 In Global stock for delivery within 4 - 6 working days
Price 1 Lot of 16
MYR 47.38
Lot(s)
Per Lot
Per unit*
1 - 5
MYR47.38
MYR2.961
6 - 11
MYR46.70
MYR2.919
12 +
MYR46.39
MYR2.899
*price indicative
Related Products
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
White, high viscosity adhesive specially formulated for cable ...
Description:
White, high viscosity adhesive specially formulated for cable attachment in the telephone, computer and alarm installation industries. High molten tackInstant grab12mm sticks, 200mm longSuitable for use with all Power Adhesive 'Hotmelt' and gas powered glue guns.
Adhesive slugs suitable for use in the Industrial ...
Description:
Adhesive slugs suitable for use in the Industrial Glue Gun (stock no.315-2637). Supplied in bags of 2kg containing approximately 33 slugs. All constituent parts of these adhesives have been approved by the American FDA under the following section CFR21, 175-105, ...
The overtec system (also known as Over-Moulding) is ...
Description:
The overtec system (also known as Over-Moulding) is a low-pressure moulding process that uses thermoplastic moulding resin to achieve high quality sealing and protection of components, faster than 2 component potting resins and far lower capital cost than injection moulding. ...