Glue sticks 11mm fast 600g

  • RS Stock No. 179-7593
  • Mfr. Part No. 052430
  • Manufacturer Steinel
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): ES
Product Details

Fast-curing adhesive, bonds within a few seconds on many materials, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 300 and GluePRO 400 LCD, temperature: 190°C, firm after a maximum of 8 seconds, strong bond after approx. 30 seconds. The fast-curing adhesive is firm after no more than 8 seconds, making it ideal for applications demanding a fast, strong bonding result. At a temperature of 190°C, the solvent-free glue sticks bond materials, such as wood, paper, card, rubber, CR, fabrics, glass, ceramics, and plastics, such as ABS, PC, PE, Plexiglas®, PP and PVC. (Times and recommended adhesive are rough guides only).

Specifications
Attribute Value
Odour Characteristic
Setting Time 30s
Physical Form Solid
Diameter 11mm
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 151.52
units
Per unit
1 - 14
MYR151.52
15 - 39
MYR147.27
40 +
MYR143.03
Related Products
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
White, high viscosity adhesive specially formulated for cable ...
Description:
White, high viscosity adhesive specially formulated for cable attachment in the telephone, computer and alarm installation industries. High molten tackInstant grab12mm sticks, 200mm longSuitable for use with all Power Adhesive 'Hotmelt' and gas powered glue guns.
The overtec system (also known as Over-Moulding) is ...
Description:
The overtec system (also known as Over-Moulding) is a low-pressure moulding process that uses thermoplastic moulding resin to achieve high quality sealing and protection of components, faster than 2 component potting resins and far lower capital cost than injection moulding. ...
Low Viscosity: Typical uses - wire staking, cable ...
Description:
Low Viscosity: Typical uses - wire staking, cable terminal encapsulation. Excellent gap filling performanceLow temperature flexibilityShock and heat resistanceEasy to apply and fast fixingUL94V-0 Rating.