Microchip MCP9600-I/MX, 18-bit Serial Thermocouple to Digital Converter Dual Differential Input, 20-Pin MQFN

  • RS Stock No. 165-4198
  • Mfr. Part No. MCP9600-I/MX
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP9600 Thermocouple Voltage Converter

The MCP9600 from Microchip is a Thermocouple to Digital Converter that translates the Thermocouple EMF into degrees Celsius with an accuracy of ±1.5°C. Integrated into the device is Cold-Junction Compensation.

The device includes user-programmable registers that allow the configuration of Low-Power modes, Temperature Alert outputs and Digital Filter for transient temperatures.

Features

Supports Type K, J, T, N, S, E, B and R Thermocouples
±1.5°C (Max.) Hot-Junction Accuracy
Measurement Resolution: Hot- and Cold-Junctions: 0.0625°C (typical)
Four Programmable Temperature Alert Outputs
Programmable Digital Filter for Temperature
Low Power Modes
2-wire Interface: I2C™ Compatible, 100 kHz, supports up to 8 devices per I2C bus
Operating Voltage Range: 2.7V to 5.5V
Operating Current: 300 μA (typical)
Shutdown Current: 2 μA (typical)

Analogue to Digital Converters - Microchip

Specifications
Attribute Value
Resolution 18-bit
Number of ADCs 2
Digital Interface Type Serial (I2C)
Number of Input Channels 1
Mounting Type Surface Mount
Sampling Rate 3sps
Architecture Delta Sigma
Typical Single Supply Voltage 2.7 → 5.5 V
Package Type MQFN
Pin Count 20
Input Signal Type Differential
Input Type Voltage
Power Supply Type Single
Integral Nonlinearity Error 10ppm
Minimum Operating Temperature -40 °C
Width 5mm
Dimensions 5 x 5 x 1mm
Maximum Operating Temperature +125 °C
Length 5mm
Height 1mm
Temporarily out of stock - back order for despatch 10/03/2020, delivery within 4 working days from despatch date
Price Each (In a Tube of 73)
MYR 19.52
units
Per unit
Per Tube*
73 +
MYR19.52
MYR1,424.96
*price indicative
Related Products
The MCP41/426X devices are non-volatile, 8-bit (257 wiper ...
Description:
The MCP41/426X devices are non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an SPI compatible interface. The MCP41/42XX family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows ...
The LTC2411/LTC2411-1 are 2.7V to 5.5V micropower 24-bit ...
Description:
The LTC2411/LTC2411-1 are 2.7V to 5.5V micropower 24-bit differential Delta Sigma analog-to-digital converters with an integrated oscillator, 2ppm INL and 0.29ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, ...
The Microchip MCP48FEB01/02 family are 8-bit voltage output ...
Description:
The Microchip MCP48FEB01/02 family are 8-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time. On-board Non-Volatile EEPROM can save DAC settings during power down; four different Voltage Reference options are available. ...
The Microchip MCP48FVB21/22 family are 12-bit voltage output ...
Description:
The Microchip MCP48FVB21/22 family are 12-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time. Featured on-board is Volatile Memory and a SPI Interface that supports write commands up to 20 MHz ...