Mitutoyo Gauge Block Set Steel Imperial, 81 piece

  • RS Stock No. 572-404
  • Mfr. Part No. 516-903-11
  • Manufacturer Mitutoyo
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Rectangular Steel gauge Block Sets

Mitutoyo 81 piece gauge block set, made of high-chromium steel with an ultra-micro-lapped surface finish heat treated and aged to give good wear resistance. Excellent inter-set wringing properties. Mitutoyo gauge blocks meet or exceed all known specifications. The flatness, parallelism and surface finish necessary to achieve the required accuracies are the same as or better than government requirements.

Features and Benefits

• High-quality alloy steel
• Carefully heat treated and stress relieved for high stability and precision lapped for good wringing properties
• Chamfered edges
• Each gauge is marked with an identification number
• Gauge block hardness is 800 HV (64 HRC) for high wear resistance
• Supplied with case

Specification

• Type: 81 piece set
• Grade: Grade 1
• Material: Steel
• Imperial - BS888 Inspection Grade

Set Configuration

• 0.1001 to 0.1009in (steps of 0.0001in)
• 0.101 to 0.149in (steps of 0.001in)
• 0.05 to 0.95in (steps of 0.5in)
• 1 to 4in (steps of 1in.)

Application Information

Mitutoyo gauge block sets are used by engineers and machine shops to measure in microns and to calibrate other measuring tool.

Specifications
Attribute Value
Imperial or Metric Imperial
Material Steel
Number of Pieces 81
Temporarily out of stock - back order for despatch 17/12/2019, delivery within 4 working days from despatch date
Price 1 Set
MYR 9,427.35
Set(s)
1 +
MYR9,427.35
Related Products
Versatile measuring tool - metric/imperialPerforms five separate & ...
Description:
Versatile measuring tool - metric/imperialPerforms five separate & distinct functionsQuality steel construction.
Blocks are manufactured from specially selected high quality ...
Description:
Blocks are manufactured from specially selected high quality age hardened alloy steelBlocks are heat treatedHigh resistance to wearSupplied in a fitted wooden case.
An angle block set for setting and checking ...
Description:
An angle block set for setting and checking angles in production or inspection areas.,Each block is manufactured from 1//4 in. (6.35mm) thick hardened steel, nominal length 3 inches.,Supplied in a hardwood storage case.
Blocks supplied in precision ground matched pairsEach block ...
Description:
Blocks supplied in precision ground matched pairsEach block measures 1 x 2 x 3inThrough hole size is 3//8 UNC clearance (0.377inch)5 holes on the largest face are tapped 3//8 UNC (The centre and 4 adjacent diagonal holes)Manufactured from tool steel, ...