RS PRO Piston Inline Flow Switch, 0.04 L/min → 0.13 L/min,

  • RS Stock No. 510-0559
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass

Note

If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.

Specifications
Attribute Value
Media Monitored Liquid
Device Type Piston Inline
Minimum Flow Rate 0.04 L/min
Maximum Flow Rate 0.13 L/min
Supply Voltage 200 V ac
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 300bar
Material Brass
Maximum Media Temperature +100°C
Maximum Operating Temperature +120°C
Current Rating 1 A
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,125.83
units
Per unit
1 +
MYR1,125.83
Related Products
The FS-4 Series makes flow protection economical for ...
Description:
The FS-4 Series makes flow protection economical for a broad range of industrial applications such as welders, lubrication systems, medical sterilisers and laundry chemicals dispensing. • Flow Rate Settings: 0.38 LPM to 6 LPM • Port Size: 9/16"" - 18 ...
Designed for low-cost flow/no-flow monitoring. This series is ...
Description:
Designed for low-cost flow/no-flow monitoring. This series is available with a clear, transparent PVC housing which is ideal for use where visual flow confirmation is desirable. These corrosion-resistant switches offer broad chemical compatibility. With only one moving part, their rugged ...
These rugged inline flow switches use 100 micron ...
Description:
These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The 1 piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. ...
This rugged inline flow switch offers the same ...
Description:
This rugged inline flow switch offers the same superior performance and resistance to clogging as its metal cousin (FS-380). The fixed set point and simple design make it a dependable switch. The FS-380P is an ideal choice for coolant applications ...