RS PRO Radial Flow Turbine Flow Meter, 1.5 L/min → 30 L/min,

  • RS Stock No. 257-133
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Liquid Flow Sensors

Two flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15mm diameter pipe connections.

Provides a pulsed output proportional to flow rate
LED and photodetector are separated by a turbine mounted on sapphire bearings
LED requires an external current limiting resistor (dependent on supply voltage)
Suitable for use with mains and heating system waters etc.
Rise/fall times 60/6ns
Output voltage 200mV (low); VCC (high)
Diode: Forward current 10mA, Power dissipation 100mW

Note

Not suitable for use with strong mineral acids/solutions, strong or searching solvents.

//media.rs-online.com/t_line/LI257133-01.gif
//media.rs-online.com/t_line/LI341480-10.gif
Specifications
Attribute Value
Media Monitored Liquid
Device Type Radial Flow Turbine
Minimum Flow Rate 1.5 L/min
Maximum Flow Rate 30 L/min
Supply Voltage 4.5 → 16 V dc
Pipe Diameter Range 15 mm
Maximum Pressure 20bar
Material Acetal Copolymer
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Current Rating 10 mA
85 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 203.21
units
Per unit
1 - 5
MYR203.21
6 - 11
MYR197.22
12 +
MYR195.15
Related Products
The Microchip MCP39F521 is an Energy Metering IC ...
Description:
The Microchip MCP39F521 is an Energy Metering IC designed for real-time measurement of input power in single-phase applications. The integrated design offers power monitoring accuracy of 0.1% error and less across a 4000:1 dynamic range. Active, Reactive and Apparent PowerTrue ...
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...
Works according to the variable area principle and ...
Description:
Works according to the variable area principle and permits an accurate measurement of liquid media. Any orientationRugged metal designNatural glassG 1//4 BSP thread16 bar operating pressure120°C maximum operating temperatureGenerally used as an indication that something is not working and can ...
The C.A 6511 and C.A 6513 are insulation ...
Description:
The C.A 6511 and C.A 6513 are insulation (500 and 1000 V) and continuity (200mA) testers and are particularly suited to taking measurements on industrial and domestic installations.Automatic verification of absence of voltage through direct measurement.Logarithmic scale makes it easier ...