Burkert Flow Controller, Cable Plug, PNP, 12 → 36 V dc
- RS Stock No. 249-7462
- Mfr. Part No. 423913
- Manufacturer Burkert
SE30 Flow Control Pulse Transmitter Module
This flow control pulse transmitter module is designed to measure the continuous flow of liquids. The sensor produces a signal which can be transmitted and processed enabling the end user to get a flow measurement. Division is performed by measuring the pulses for the required unit of flow (litres per min.) and then, by the use of four rotary switches on the divider unit (discontinued) - that sit on top of the transmitter to divide signals enabling the output to be tailored to individual requirements. The correct dividing factor can be set up to give the required pulses out for the flow rate. If a fast flow is being monitored and the number of pulse outputs is extremely high the divider unit will bring this down to a more usable level and enable the measurement of any flow rate, regardless of PLC connected.
Lower specification flow control transmitter module for use with PLCs
PNP or NPN output (use either depending on the PLC type
Interfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)
Note
This unit requires a direct 12 to 30Vdc supply. It is not compatible with output modules, such as the 4-20mA transmitter.
Burkert Flow Transmitter + Sensor
The Burkert flow transmitter + sensor has an open collector (PNP/NPN) type output and cable plug electrical connection device. It is designed to measure the continuous flow of liquids. Its operating voltage rating ranges between 12VDC and 36VDC. This sensor produces a signal which can be transmitted and processed enabling the end-user to get a flow measurement. The division is performed by measuring the pulses for the required unit of flow (litres per min.) and then, by the use of four rotary switches on the divider unit (discontinued) - that it is on top of the transmitter to divide signals enabling the output to be tailored to individual requirements. The correct dividing factor can be set up to give the required pulses out for the flow rate.
Features and Benefits
• Signal pickup through hall sensor
• Flow velocity ranges between 0.3m/s and 10m/s
• Sensor size range is DN15 to DN65 with bayonet fitting
• 3-wire frequency for direct connection to PLC (PNP and NPN)
• Body material is polycarbonate PPO
Applications
• Flow measurement and dosing control
• Water treatment and process technology
• Cooling water monitoring
• Industrial wastewater treatment
• Auxiliary plants irrigation
• Ideal system solutions for pure water and chemical aggressive liquids
Certifications
• IP65 rated
• EN 175301803
• DIN 43650
| Attribute | Value |
|---|---|
| Electrical Connection | Cable Plug |
| Control Output | PNP |
| Mounting Style | Compact |
| Supply Voltage | 12 → 36 V dc |
| Pipe Diameter Range | DN 6 → 65 mm |
| Minimum Operating Temperature | -15°C |
| Maximum Operating Temperature | +60°C |
