S/steel 2 position float switch,25/125mm

  • RS Stock No. 492-8924
  • Mfr. Part No. SSF67A25B125
  • Manufacturer Cynergy3
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Dual Position Stainless Steel Float Switch

Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.

Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications

Note

All ratings in tech. spec. table are for resistive loads only

//media.rs-online.com/t_line/L492890-01.gif

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specifications
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output Direct Load
Body Material Stainless Steel
Minimum Operating Temperature -20°C
Maximum Operating Temperature +135°C
Maximum Current 600 mA
Maximum Pressure 10bar
Gasket Material Nitrile
Series SSF67
Temporarily out of stock - back order for despatch 15/05/2020, delivery within 4 working days from despatch date
Price Each
MYR 893.48
units
Per unit
1 - 5
MYR893.48
6 +
MYR861.56
Related Products
The LS-3 Series of Gems sensors level switches. ...
Description:
The LS-3 Series of Gems sensors level switches. Ideal for shallow tanks or restricted spaces, or for any low-cost, high volume use. Easy to install, the LS-3 can be used either way up and is easy switched between normally closed ...
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
The Cynergy3 external low-level float switch has a ...
Description:
The Cynergy3 external low-level float switch has a nylon body. This device is particularly suitable for detecting low-levels of liquids in the bottom of the tanks, containers and lower SG liquids. The switch action may be reversed by mounting the ...
The RS PRO float switch is a horizontally ...
Description:
The RS PRO float switch is a horizontally mounted switch. This is manufactured in SS 304 and 316 and works in liquids of SG 0.8 minimum. The switch action may be reversed by mounting the device with the orientation arrow ...