Sensata / Cynergy 3 RSF66 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, Direct Load, 240V ac

A float switch capable of offering a variety of switching options and adjusting to system requirements. Compatible with a wide choice of chemicals and liquids due to the fact they are manufactured from high grade polyphenylene sulphide.

Suitable for Controlling, Filling or Emptying of Tanks via Electromechanical Relays
Provides Make/Make or Break/Break Switch Action With a Choice of 50 or 100mm Separation Between Upper and Lower Switching Points
All Units WRAS Approved

The Cable entry point must NOT under any circumstances be submerged:
– On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
– On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.

Choose this Sensata Cynergy3 dual float switch to keep your system's liquid levels within pre-set high and low limits. You can use it to control the emptying of tanks via electromechanical relays. The switch is made from durable and robust PPS (polyphenylene sulphide) which is compatible with a wide range of liquids, including inorganic and organic chemicals, oils and water. The device comes supplied with a four-core PVC cable, and you can mount it vertically on the top or bottom of your tank, so it's ideal for use when there's no side access.

• Wide operating temperature range of -10°C to +85°C for use in challenging environments
• 1m standard cable length with flying lead for flexibility
• Nitrile rubber gasket for resistance to corrosion and abrasion

This device has an internal magnet that'll move in relation to the reed switch as liquid levels change. When the liquid reaches a specified level, the magnet will trigger the switch, which can then activate an alarm.