3M Nylon Flap Wheel 120 Grit, 75mm x 35mm

  • RS Stock No. 456-2631
  • Mfr. Part No. FLAP BRUSH 75 X 35MM AMED
  • Manufacturer 3M
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Scotch-Brite™ Roloc™+ Cut & Polish Flap Brush PF-ZR Brown 75mm x 35mm

Scotch-Brite™ Roloc™ Cut and Polish Flap Brush uses tough durable aluminium oxide mineral and our unique non-woven web design of blended synthetic fibres and abrasive particles in a conformable, three-dimensional material. These brushes provide a smooth and polished finish.

Use Scotch-Brite™ Roloc™ Cut and Polish Flap Brush for deburring, blending and finishing a variety of substrates in woodworking and metalworking.

These brushes are made with an aluminium oxide mineral, a sharp cutting and durable abrasive which continually self-fractures during use to expose fresh cutting edges and provide a smooth consistent finish – unlike traditional abrasives, such as garnet, which quickly wear down with use. This high cut-rate, hardness, strength, and low heat retention makes aluminium oxide mineral ideal for sanding and finishing applications. It can be used on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite Roloc Cut and Polish Flap Brushes are engineered to conform to the substrate, so they are a good option for working inside diameters and for blending surface imperfections. The open, flexible flap construction makes the brush soft and pliable and helps to produce uniform finishes. The brushes give a smooth consistent finish, without the risk of overworking or damaging the part.

Features and Benefits

• Aluminium oxide mineral easily removes surface imperfections, helping to cut faster

• Easy abrasive wheel attachment Heavy-duty design for a longer brush life

• Load resistant open web helps produce a consistent finish

• Open web conforms to substrate to minimise gouging

Typical Applications

• Use for deburring, blending and finishing many substrates in woodworking and metalworking

Specifications
Attribute Value
Abrasive Material Nylon
Grit Size 120
Diameter 75mm
Thickness 35mm
Maximum Safe Speed 700rpm
Model Roloc +
12 Within 4 working day(s) (Global stock)
55 Within 4 working day(s) (Global stock)
Price Each
MYR 78.59
units
Per unit
1 +
MYR78.59
Related Products
Scotch-Brite™ flap disc fitted on a 6 mm ...
Description:
Scotch-Brite™ flap disc fitted on a 6 mm shaft.For polishing and satin-chrome finishing on all metals (stainless steel, carbon steel and non-ferrous metals).Nylon fibre base: does not rust and does not contaminate the surface.For use on drill or straight grinder, ...
Flap wheel grinders ideally suited for stock removal, ...
Description:
Flap wheel grinders ideally suited for stock removal, deburring, cleaning, blending and finishing on a wide range of materials. Aluminium OxideIntegral 6mm diameter shaft.
Molded, abrasive filled bristles finish, polish, and deburr, ...
Description:
Molded, abrasive filled bristles finish, polish, and deburr, more effectively than wire brushesProprietary 3M™ Ceramic Abrasive Grain blend provides high degree of finish quality throughout the life of the discCleans with minimal pressureFlexible bristles produce uniform finishes around protrusions, detail ...
The Scotch-Brite™ Radial Bristle Brush features 3M Ceramic ...
Description:
The Scotch-Brite™ Radial Bristle Brush features 3M Ceramic Abrasive Grain technology blended with Aluminium oxide and moulded into flexible bristles. This brush allows for more surface contact than wire brushes and continually self-sharpens so the abrasive doesn't dull over time. ...