RS PRO Cast Iron 146 Side Palm, 42.4mm Round Tube, Type 2

  • RS Stock No. 286-3667
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Side Palm, (Closed one end)

For fixing uprights to a wall
Ideal where there is a step between levels and the vertical face is exposed i.e. platforms, stairs, ramps etc

Note

If machined to allow the upright to pass through, then the bottom fixing hole in flange may be unusable.

Standards

BS 1387

Specifications
Attribute Value
Component Type Side Palm
Structural Element Type Round Tube
Product Family RS Handrail System
Product System 146
Fits Round Tube Size Type 2
Fits Tube Diameter 42.4mm
Fits Strut Profile Type 2
Material Cast Iron
24 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 69.23
units
Per unit
1 - 4
MYR69.23
5 - 24
MYR65.72
25 +
MYR63.11
Related Products
For flat surfaces, foot plates can be used, ...
Description:
For flat surfaces, foot plates can be used, providing a cost effective method of mounting beams to the floor.Fasteners not included.For stock-no. 248-9950 use qty1 M8x30 countersunk socket screws (stock-no. 210-360) or qty4 M6´30 (stock-no. 171-922).For stock-no. 261-2188 use qty4 ...
Medium duty, with height adjustment to compensate for ...
Description:
Medium duty, with height adjustment to compensate for variations in floor surface etc.When used with XCBL (Light) beams, an end plate should be used.Beam to be deburred and roll threaded as required.
Provides sturdy attachment of beam end to the ...
Description:
Provides sturdy attachment of beam end to the floor. Supplied with fasteners to secure the beam, and can be free standing or bolted to the floor. Hole sizes/centres (mm): XC44=9/100, XC64=11/180, XC88=13.5/220.
Adjustable levelling feet with articulated base pad to ...
Description:
Adjustable levelling feet with articulated base pad to accommodate irregularities in the floorResistant to mineral oil and organic solventsAvailable with M8 thread (30mm dia base) for 8mm groove strut profiles or M12 thread (44mm dia base) for 10mm groove strut ...