120W Fixed Installation Car Power Adapter, 11 → 32V dc / 300V dc

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Battery to 300Vdc Converter 120W - 3 Pin IEC Output Socket

The SM1760 provides a mains level DC output which is the most efficient means of supplying power to equipment employing switch mode type power conversion (most modern electric equipment).,To check compatibility: Measure the resistance between the live and the neutral pins of the equipments connector (with equipment mains switch in 'on' position). If the resistance is greater than 10KΩ (no mains transformer evident) the equipment should be compatible.

Wide input voltage range (11-32Vdc)
In line input connectors (supplied)
Shuttered IEC output socket
Ignition or remote on/off control by logic compatible input
Inbuilt RFI filter for low noise
High efficiency (84% typical)
High output surge rating
Output short circuit protection
Rugged metal case construction


Suitable for negative earth battery systems only.,Not suitable for use with equipment employing a 50Hz mains transformer or AC motors.


The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For inside use only. Protect from moisture.

Battery to Mains Level DC Output

Attribute Value
Input Voltage 11 → 32V dc
Output Voltage 300V dc
Output Power Continuous 120W
Output Power Intermittent 200W
Output Connection Type IEC Socket
Efficiency 84%
Output Current 400 mA, 600 mA
Length 147mm
Width 95mm
Depth 50mm
Weight 830g
Minimum Temperature -10°C
Maximum Temperature +30°C
Mounting Type Mounting Bracket
Adapter Type Fixed Installation
Stock check temporarily unavailable - call for stock availability
Price Each
MYR 964.32
Per unit
1 - 4
5 - 9
10 - 24
25 - 49
50 +
Related Products
In-Vehicle Dual Port USB Smart Charger with Back ...
In-Vehicle Dual Port USB Smart Charger with Back light, 2. 4A. Over voltage, Reverse battery and over current protection. ESD and short circuit protection. Optional tethered dust caps. 2. 4A output current. Battery Operating Voltage: 9V to 16V. Operating temperature: ...
Anodized aluminum case provides durability & max heat ...
Anodized aluminum case provides durability & max heat dissipation The converter is compact, light weight and east to operate. 100% New components use 100% Real power Dual color LED indicate power & failure status Protections: over current, over voltage, overheat, ...
Switch mode converter with independent input and output ...
Switch mode converter with independent input and output isolated from the chassis.This converter is essential within an automotive electronic system as it offsets the variations in output voltage from the battery caused by the load or by the engine starting.The ...
Robust switch mode battery voltage DC to DC ...
Robust switch mode battery voltage DC to DC converters for use when operating 12Vdc or 24Vdc equipment (communications, alarms, lighting, etc.) from either a 12V or 24V battery system (coaches, HGV and agricultural vehicles utilise 24Vdc). Wide input voltage rangeIgnition ...