STEGO FPI/FPO 018 Series Filter Fan, 230 V ac, AC Operation, 560m³/h Filtered, 624m³/h Unimpeded, IP54, 291 x 291mm
- RS Stock No.:
- 194-7674
- Mfr. Part No.:
- 01874.0-31
- Manufacturer:
- STEGO
2 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR1,446.12
Units | Per Unit |
1 + | MYR1,446.12 |
- RS Stock No.:
- 194-7674
- Mfr. Part No.:
- 01874.0-31
- Manufacturer:
- STEGO
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating.
The Filter Fan Plus series uses a new air flap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan.
The Filter Fan Plus series uses a new air flap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan.
Specifications
Attribute | Value |
---|---|
Unimpeded Air Flow | 624m³/h |
Noise Level | 70dB(A) |
Filtered Air Flow | 560m³/h |
Input Current | 700mA |
Input Power Rating | 140W |
AC or DC Operation | AC |
Face Dimensions | 291 x 291mm |
Installation Depth | 160mm |
Supply Voltage | 230 V ac |
Face Height | 291mm |
Face Width | 291mm |
IP Rating | IP54 |
Bearing Type | Ball |
Series | FPI/FPO 018 |
Termination Type | Clamp |
Special Features | Easy Mounting, New Air Flap Outlet Technology for High Airflow, One Filter Mat, Ratchet Mechanism is Used for Mounting and Provides High Stability and Tightness |