Bi-Pin Indicator Light, 6 V dc, 75 mA, 1000h

  • RS Stock No. 889-6764
  • Mfr. Part No. 7377
  • Manufacturer VCC
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

T-1 (6mm) Bi-Pin

A range of T-1 3/4 (6mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

Wire-Ended & Bi-Pin

Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Specifications
Attribute Value
Voltage Rating 6 V dc
Lamp Base Bi-Pin
Current Rating 75 mA
Diameter 6mm
Lamp Size T-1 3/4
Length 16 mm
Life Hours 1000h
Temporarily out of stock - back order for despatch 24/03/2020, delivery within 4 working days from despatch date
Price 1 Pack of 1000
MYR 4,582.38
Pack(s)
Per Pack
Per unit*
1 +
MYR4,582.38
MYR4.582
*price indicative
Related Products
A range of T-1 1/4 (4mm) Bi-pin filament ...
Description:
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc. Body colour coding: White (6V), Yellow (12V), Green (24V), 14V and 28V colour coding not applicable.
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
Designed for use in areas where a sealed ...
Description:
Designed for use in areas where a sealed front panel switch is required to work in hostile environmentsSupplied with one contact block fitted, but up to two extra blocks may be added to make a total of three per switch ...