Baumer Plastic Fibre Optic Sensor 300 mm, PNP Output, IP40, 10.8 → 26.4 V dc
- RS Stock No.:
- 214-701
- Mfr. Part No.:
- FVDK 10P 67Y0 S35A
- Manufacturer:
- Baumer
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 214-701
- Mfr. Part No.:
- FVDK 10P 67Y0 S35A
- Manufacturer:
- Baumer
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- JP
Product Details
FVDK 10P67Y0 cell for fibre optics
Amplifier for fibre optics characterised by simple and intuitive installation and operation.
2 x 4 digit display for viewing the switch point and the relative receiving value.
The Teach-in function makes it possible to save two objects or two contrasts by pressing the Teach-in button twice.
PNP output available via an M8 x 1 4-pole connector.
Protected against short circuits and polarity reversal.
2 x 4 digit display for viewing the switch point and the relative receiving value.
The Teach-in function makes it possible to save two objects or two contrasts by pressing the Teach-in button twice.
PNP output available via an M8 x 1 4-pole connector.
Protected against short circuits and polarity reversal.
Fibre Optic Amplifiers
Note
Fibres are shown with amplifiers for illustration purposes and are not included. Please select suitable fibres from the accessories table.
Specifications
Attribute | Value |
|---|---|
| Detection Range | 300 mm |
| Output Type | PNP |
| Fibre Optic Type | Plastic |
| Response Time | 0.058 → 5 ms |
| Light Source | Red LED |
| Electrical Connection | Cable |
| IP Rating | IP40 |
| Housing Material | ABS, PC |
| Supply Voltage | 10.8 → 26.4 V dc |
| Length | 33.8mm |
| Width | 10mm |
| Dimensions | 33.8 x 10 x 70.2 mm |
| Depth | 70.2mm |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +55°C |