Petzl Rescue Pulley Aluminium

  • RS Stock No. 136-3819
  • Mfr. Part No. P50A
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Petzl RESCUE Pulley

Petzl RESCUE pulley is a high strength pulley complete with swinging side plates and is strong. The RESCUE pulley is ideal for use when hauling heavy loads or for intensive use.


RESCUE pulley High strength pulley
Swinging side plates
Ideal for heavy and intensive loads
Large diameter sheave – mounted on sealed ball bearings
Accepts up to 3 carabiners


Made from Aluminium Weight – 185 g
Minimum rope diameter – 7 mm
Maximum rope diameter – 13 mm
Sheave diameter 38 mm
Efficiency 95%
Working load 8 kN
Working load – one rope strand – 4 kN
Breaking strength – 36 kN

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Attribute Value
Product Type Pulley
Material Aluminium
24 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 282.02
Per unit
1 +
Related Products
Petzl FIXE is a versatile and compact pulley ...
Petzl FIXE is a versatile and compact pulley which provides speedy installation onto a rope. FIXE pulley Fixed side plates Quick installation onto the rope using a rope clamp Designed for hauling systems and deviations Sheave mounted on self-lubricating bushings ...
The CAPTIV positioning bar helps load the carabiner ...
The CAPTIV positioning bar helps load the carabiner along the major axis, limits flipping and keeps it integrated with the device or lanyard. CAPTIV is compatible with OK, Am’D, WILLIAM, OXAN carabiners and the ROLLCLIP A pulley carabiner. Designed to ...
These pulleys are designed to be used with ...
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitchSuitable for belts 6.4mm ( 1/4 in.) and ...
5mm pitch x 15mm wide beltManufactured from high ...
5mm pitch x 15mm wide beltManufactured from high strength materialDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft sizePulley width 20.5mm.