RE918, Double Sided Extender Board Adapter Adapter With Adaption Circuit Board FR4 64.5 x 24 x 1.5mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

RE918 Adapter Molex FPC/FFC

Adaption circuit board for Molex FPC/FFC
Epoxy fibre-glass FR4 1.50 mm
Double-sided 35 μm Cu
Plated through holes (PTH)
Surface chem. Ni/Au
Solder stop mask
50 solder pads with 1.00 mm pitch
50 solder pads with 0.50 mm pitch
Hole spacing 2.54 mm
2 Pick-up-holes Ø 3.20 mm

Specifications
Attribute Value
Type Adapter With Adaption Circuit Board
Base Material Epoxy fibre-glass
Number of Sides 2
Dimensions 64.5 x 24 x 1.5mm
Copper Thickness 35µm
FR Material Grade FR4
Length 64.5mm
Thickness 1.5mm
Width 24mm
28 Within 4 working day(s) (Global stock)
304 Within 4 working day(s) (Global stock)
Price Each
MYR 17.59
units
Per unit
1 +
MYR17.59
Related Products
Double sided pth glass fibre extender boards for ...
Description:
Double sided pth glass fibre extender boards for use with both 160mm and 220mm deep Eurocards in 64-way or 96-way DIN 41612 connector options. Plug link facility for disconnection of each line allows voltage/logic status checks etc.Plug links arranged in ...
Double-sided extender boards for testing Eurocards. The extender ...
Description:
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test. DIN 41612 type B connectorsSolder resist coating to prevent solder bridging and ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Solder the IC to the centre of the ...
Description:
Solder the IC to the centre of the board, then bring wires out from the nearby landsUse ICs with fewer pins in the centre of the patternPlease note that some ICs cannot be used due to pin placement etc.