CK-5, 50 Way Double Sided DC Converter Board FR4 42.43 x 86.2 x 1.2mm

  • RS Stock No. 381-6993
  • Mfr. Part No. CK-5
  • Manufacturer Sunhayato
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

SMD Connector Conversion Board

Converts every type of surface mount connecter to 2.54mm pitch
Boards have a centreline V-cut allowing them to be separated into two halves allowing compatibility with wide connecters and single line connectors.

Specifications
Attribute Value
Type Converter Board
Number of Contacts 50
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 42.43 x 86.2 x 1.2mm
FR Material Grade FR4
Length 42.43mm
Thickness 1.2mm
Width 86.2mm
12 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 72.71
units
Per unit
1 +
MYR72.71
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Solder the IC to the centre of the ...
Description:
Solder the IC to the centre of the board, then bring wires out from the nearby landsUse ICs with fewer pins in the centre of the patternPlease note that some ICs cannot be used due to pin placement etc.
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Adaption circuit board for SOT23-10Epoxy fibre-glass FR4 1.50 ...
Description:
Adaption circuit board for SOT23-10Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mm.