Microchip KSZ8061MNXI, Ethernet Transceiver, 10Mbps, 3.3 V, 32-Pin QFN
- RS Stock No.:
- 122-4831
- Mfr. Part No.:
- KSZ8061MNXI
- Manufacturer:
- Microchip
Available for back order.
Added
Price Each (In a Pack of 4)
MYR9.973
| Units | Per Unit | Per Pack* |
| 4 - 16 | MYR9.973 | MYR39.892 |
| 20 + | MYR9.67 | MYR38.68 |
| *price indicative | ||
- RS Stock No.:
- 122-4831
- Mfr. Part No.:
- KSZ8061MNXI
- Manufacturer:
- Microchip
Technical data sheets
Legislation and Compliance
Product Details
KSZ8061M 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Specifications
Attribute | Value |
|---|---|
| IC Type | Transceiver IC |
| Data Rate | 10 Mbps, 100Mbps |
| Number of Transceivers | 1 |
| Standard Supported | IEEE 802.3az |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 32 |
| Typical Operating Supply Voltage | 3.3 V |
| Dimensions | 5 x 5 x 0.95mm |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |