WIZnet Inc RTL8201CP-VD-LF, Ethernet Controller, 10 Mbps, 100 Mbps MII, SNI, 3.3 V, 48-Pin LQFP

  • RS Stock No. 173-0300
  • Mfr. Part No. RTL8201CP-VD-LF
  • Manufacturer WIZnet Inc
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): KR
Product Details

Embedded Ethernet Controllers

WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:

RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect with an external 100Base-FX fiber optic tranceiver
W3100A-LF is a fully hardwired TCP/IP stack supporting TCP, UDP, IP, ARP, ICMP, MAC internet protocols. Features include amazing protocol processing speed depending upon MCU); 8051 (max. 1Mbps), AVR (max.8 Mbps), ARM7 (max. 21Mbps)
W3150A+ is a fully hardwired TCP/IP stack with support for ADSL connection (with PPPoE) and TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC protocols. Features include High Throughput speeds; 8051(max. 1Mbps), AVR (max. 8Mbps), ARM7 (max. 21Mbps) and 10/100 Base-T Ethernet (Auto detection) support
W5100 is a fully hardwired TCP/IP stack with support for TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE protocols. Features include 10BaseT/100BaseTX Ethernet MAC/PHY embedded support and ADSL connection (with PPPoE Protocol with PAP/CHAP Authentication mode)
W5300 is designed for Internet embedded applications. The full hardware logic integrates 10/100 Ethernet controller, MAC, and TCP/IP with communication protocols such as TCP, UDP, IPv4, ICMP, IGMP, ARP and PPPoE. The data communication memory is extended to 128Kbyte and supports 16-bit bus interface.

Specifications
Attribute Value
Physical Network Type 10BaseT, 100BaseTX
Network Interface MII, SNI
Communication Mode Full Duplex, Half Duplex
Data Rate 10 Mbps, 100 Mbps
Loopback Mode External, Internal
Standard Supported IEEE 802.3u
Mounting Type Surface Mount
Package Type LQFP
Pin Count 48
Auto-Negotiation Yes
Typical Operating Supply Voltage 3.3 V
Dimensions 7 x 7 x 1.5mm
Minimum Operating Temperature 0 °C
Height 1.5mm
Length 7mm
Maximum Operating Temperature +70 °C
Width 7mm
520 In Global stock for delivery within 4 - 6 working days
Price Each (In a Tray of 260)
MYR 6.563
units
Per unit
Per Tray*
260 +
MYR6.563
MYR1,706.38
*price indicative
Related Products
The MAX4890 series by Maxim Integrated contains high-speed ...
Description:
The MAX4890 series by Maxim Integrated contains high-speed analogue switches which meet the needs of 10/100/1000 Base-T applications. These uniquely designed devices are able to switch the signals from two interface transformers and are then able to connect the signals ...
The KSZ8851 is a single-port controller chip with ...
Description:
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs. Integrated MAC and ...
The PL360 is a programmable modem for narrow-band ...
Description:
The PL360 is a programmable modem for narrow-band Power Line Communication (PLC), able to run any PLC protocol in the frequency band below 500 kHz. This device has been designed to comply with FCC, ARIB, KN60 and CENELEC EN50065 regulations ...
The System Controller Hub (SCH) is a component ...
Description:
The System Controller Hub (SCH) is a component of Intel® Atom™ processor technology. The SCH combines functionality normally found in separate GMCH (integrated graphics, processor interface, memory controller) and ICH (on-board and end-user I/O expansion) components into a single component ...