RS PRO Surface ESD Tester

  • RS Stock No. 776-8318
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Analogue Surface Resistance Test Kit

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.

Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low

Supplied with

1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration

RS Pro Surface ESD Tester Description

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 105 ohms.

ESD protected area products should be tested:
A. Prior to installation to qualify for listing in user’s ESD control plan. Approved ESD materials (see product qualification EN-61340-5-1 Table 3 - EPA Requirements)
B. During initial installation
C. For periodic checks of installed products as part of EN-61340-5-1 Compliance Verification testing per Table 3 - EPA Requirements.

Contents

1 x Analogue Surface Resistance Meter
1 x 9V Alkaline Battery
2 x Shielded Test Leads
2 x 2.27 kilograms Electrodes
1 x Plastic Carrying Case
1 x Certificate of Calibration

Specifications

Accuracy: +/- 1/2 decade
Meter: 0.2 kg
Kit: 5.4 kg
Meter: 11.4cm L x 7.1cm W x 5.3cm H
Plastic Carrying Case: 24.1cm L x 30.5cm W x 8.9cm H
Power Supply: 9V alkaline battery

Specifications
Attribute Value
Equipment Type Analogue Surface Resistance Test Kit
Power Source Battery
Test Point Surface
Supply Voltage 9V
Depth 241 mm
Height 89 mm
Width 305mm
Display Type Analogue
Complies with EN 61340-5-1 Yes
Temporarily out of stock - back order for despatch 05/11/2019, delivery within 4 working days from despatch date
Price Each
MYR 3,501.23
units
Per unit
1 +
MYR3,501.23
Related Products
A low cost, battery powered component tester with ...
Description:
A low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. Making it ideal for use in field service and production environments. Tests: Batteries, diodes, LEDs, transistors & SCRsMeasures resistance and capacitanceLow ...
RS SMD-100 has a changeable head for automatic ...
Description:
RS SMD-100 has a changeable head for automatic scan check DC/AC Voltage, components (resistance, capacitance, diode and continuity) and circuit fault. All inputs are protected according to EN 610101-1 CATIII 600V. Automatic DCV or ACV selection, Capacitance, Resistance, Continuity and ...
Electrical testers to be used on motors, generators, ...
Description:
Electrical testers to be used on motors, generators, cables, or switch gear,the tester line is designed to be safe, simple to use and gimmick-free. A perfect solution for troubleshooting, commissioning, and preventative maintenance applications. Meets IEC10101, CATIII 1000VLarge dual display ...
3-state touch tester designed for fast, frequent testing ...
Description:
3-state touch tester designed for fast, frequent testing of ESD personnel grounding devices. Incorporates unique dual test circuit design which improves accuracy and eliminates need for separate wrist strap and foot grounder test unitsEquipped with 750 kΩ → 35 MΩ ...