Gossen Metrawatt M520P Electrical Tester

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

PROFITEST MXTRA M520P Test Instrument for VDE 0100 / IEC 60364.6

The PROFITEST MXTRA is a broad-range measuring device for use on all alternating and three-phase electrical systems with voltages from 65 to 500 V and frequencies of 15.4 to 420 Hz.

Features and Benefits

Loop and line impedance measurement Measurement of insulation resistance using nominal voltage, with variable or rising test voltage
Low-resistance measurement
Earth resistance measurement
Standing-surface insulation measurement
Universal connector system
BLUETOOTH Interface

Typical applications

Simulation of errors Testing installations
Earth resistance
Testing electric vehicle charging stations
Testing of residual current devices (RCCBs)
Special testing for systems and RCCB's
Special testing for RCD's
Testing of RCCB's in IT systems

Specifications
Attribute Value
Loop Impedance Test Type Line to Earth
Automatic RCD Test Yes
RCD Ramp Test Yes
Insulation Test Voltage 1000V
Maximum Voltage Measurement 500V
Test Type Auto Test, RCD Test, RCD Trip Current, RCD Trip Time
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Bluetooth
RCD Test Type B, B+, G, R
Test Standards IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
IP Rating IP40
Maximum Operating Temperature +50°C
Safety Category CAT III 500 V, CAT IV 300 V
Dimensions 260 x 330 x 90mm
Maximum Continuity Resistance <50kΩ
Safety Category Voltage 300 V, 500 V
Battery Type 1.5 V AA
Model Number p M520P
Weight 2.3kg
Safety Category Level CAT III, CAT IV
Power Source Battery
Minimum Operating Temperature -5°C
Height 90mm
Width 330mm
Length 260mm
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 12,306.48
units
Per unit
1 +
MYR12,306.48
Related Products
The Megger electrical tester is an MFT1800 series ...
Description:
The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing ...
The 3-in-1 multi-function tester, installation tester and pass/fail ...
Description:
The 3-in-1 multi-function tester, installation tester and pass/fail tester. Replaces multimeter, insulation tester, RCD tester, loop impedance tester and phase sequence testerInstallation verification tests to AS/NZS3017 covering earth continuity, insulation resistance, polarity, correct connections, fault loop ...
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, PRO-Schuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, Universal Carrying Pouch F2010 Z700G, Battery Pack Master Z502H and charger Z502R. Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phasesequence and voltageOFFSET Management RL-PE / RN-PE ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R. Measurement of RLO, ...