Weidmuller, SAK Series , 800 V Feed Through Terminal Block, Screw Down Termination

  • RS Stock No. 718-1005
  • Mfr. Part No. SAK 2.5/35 -380460000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SAK TS35 Range

High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 with a working temperature of -50°C to +100°C, and meet the requirements of IEC 60947-1.

Features and Benefits

• AP SAK End plates available in 4 sizes to suit 2.5 mm² to 35 mm² terminals • Partitions available in both beige (RS 755-3725) and blue (RS 718-0914, RS 718-0923, RS 718-0926)
• Flammability class UL 94V-2
• Clamping yoke technology

Approvals

CSA certified, UL listed, NEMKO, ATEX, and IECEx

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Series SAK
Wire Size 26 → 10 AWG
Cable CSA 2.5mm²
Colour Beige
Current Rating 41A
Number of Levels Single
Termination Method Screw
Voltage Rating 800 V
Minimum Operating Temperature -50°C
Maximum Operating Temperature +100°C
480 Within 2 working day(s)
4470 Within 4 working day(s) (Global stock)
Price Each (In a Pack of 10)
Was MYR10.425
MYR 5.219
units
Per unit
Per Pack*
10 +
MYR5.219
MYR52.19
*price indicative
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
DIN Rail grounding terminal blocks are a great ...
Description:
DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly ...
DIN Rail grounding terminal blocks are a great ...
Description:
DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly ...
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...