Weidmuller, SAK Series , 800 V Feed Through Terminal Block, Screw Down Termination

  • RS Stock No. 425-594
  • Mfr. Part No. 0279660000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Standard Terminals, End Covers, and Jumper Bars

Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.

Note

TSCH small partitions fit SAK 2.5, 5, 6N, 10 and 16 standard terminals.,Stock No.s 425-639 and 425-645 do not have DEMKO Approval

Approvals

CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO

Approvals

1, 2, 4 -7

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Series SAK
Wire Size 26 → 10 AWG
Cable CSA 2.5mm²
Colour Brown
Current Rating 41A
Number of Levels Single
Termination Method Screw
Voltage Rating 800 V
Minimum Operating Temperature -50°C
Maximum Operating Temperature +100°C
980 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
Was MYR6.96
MYR 5.483
units
Per unit
Per Pack*
10 +
MYR5.483
MYR54.83
*price indicative
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
DIN Rail grounding terminal blocks are a great ...
Description:
DIN Rail grounding terminal blocks are a great solution for space saving and downsizing in control panels, due to their compact size of 3.5 mm width. The XW5G series terminal blocks are easy to install and wires are held firmly ...
These terminals will accept M4 (6mm2 csa type) ...
Description:
These terminals will accept M4 (6mm2 csa type) or M6 (25mm2 csa type) crimp terminal rings. Provision of a quick, secure connection is made possible by the hinged cover wings which hold the nut. When the wings are folded up, ...
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...