Entrelec, End Section, ES4 Series

  • RS Stock No. 666-3133
  • Mfr. Part No. 1SNK505910R0000
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

End Stops

For use with SNK terminal blocks
End Sections suitable for terminals up to 16mm²

SNK Series Screw Clamp Din Rail Terminal Blocks

A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction and prevents reverse mounting errors. Easy to fit with positive snap action and constructed from ridged flame retardant material. A comprehensive list of international approvals including, UL, CSA, CE, ATEX and IECex, support worldwide use.

Specifications
Attribute Value
Accessory Type End Section
Series ES4
For Use With Terminal Block
Hazardous Area Certification ATEX
4510 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 2.069
units
Per unit
Per Pack*
10 +
MYR2.069
MYR20.69
*price indicative
Related Products
The partition fits the end of a terminal ...
Description:
The partition fits the end of a terminal and doubles as an end cover and insulating barrier by extending above it. The translucent protective cover snap-fits onto the terminal partition. In addition to providing extra protection it provides space for ...
An end cover manufactured from the same insulating ...
Description:
An end cover manufactured from the same insulating material as the terminals, is available in grey and blue,A metal end stop for fitting at the ends of an assembled rail,A pre-assembled jumper bar, for transverse connections of up to 10 ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...