Entrelec, End Section, FED Series

  • RS Stock No. 458-5836
  • Mfr. Part No. 1SNA291131R1700
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Standard Terminal Blocks

These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from 2.5mm² to 10mm² stranded wire (4mm² to 16mm² solid wire). Disconnect fuse and sensor/actuator terminals also available.,The grey (phase) terminals are available in standard (1 in / 1 out, 1 in / 2 out), and 2 in / 2 out form, together with a 2.5mm² double-deck terminal.,The standard (1 in / 1out) yellow terminals are designed for grounding purposes, but they DO NOT provide an electrical connection to the DIN rail.,They have a green colour-coded conductor entry point, for the intended insertion of a grounding or earth-potential cable.,* Direct earth (connection to rail) green/yellow terminals are available in 2.5/5mm², and 6/8mm²,End plates in respective sizes are also available, as are dedicated end-stops.

Warning

  • The yellow terminals must not be considered to be 'direct earth' terminals as they do not have an integral connection to the rail.
Specifications
Attribute Value
Accessory Type End Section
Series FED
For Use With Terminal Block
140 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
MYR 3.028
units
Per unit
Per Pack*
5 +
MYR3.028
MYR15.14
*price indicative
Related Products
Screw compression clamp terminals incorporating a spring under ...
Description:
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw ...
Requires a separator end section every 40cm approx. ...
Description:
Requires a separator end section every 40cm approx. and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizesSnap-fits into place and secured with a ...
Shielded clamping screw to directly contact shielded wires ...
Description:
Shielded clamping screw to directly contact shielded wires and busbarsTransport rails 1000 mm long, tin-coatedDistancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)Insulated holding block for busbars with M4 x 8 mm screen for common shielding ...
Ranges of power terminal blocks, fitted with 1 ...
Description:
Ranges of power terminal blocks, fitted with 1 or 2 covers, for DIN rail.A stopper, screw bridge bars and a branch for Faston 6.35 x 0.8mm tabs are available separately.Central hex socket connection screw, 6mm.M6 screw for direct fixing.