Wago, 2-Pole Jumper Bar, 870 Series

  • RS Stock No. 388-7490
  • Mfr. Part No. 870-402
  • Manufacturer Wago
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

869 Series

DIN Rail terminals have a modular design with a 5 mm width. The standard 'centre' terminals have a tab mating facility, with the 'end' terminals having flanges for M4 fixing (Ø 4.2 mm). Centre and end terminals can easily be combined with end plates to make up a complete terminal strip.

Features and Benefits

• Rated voltage: 500 V/6 kV
• Front cabling allows for space saving
• Cage clamp® connection
• Jumper bars and marking accessories also available

Specifications
Attribute Value
Accessory Type 2-Pole Jumper Bar
Series 870
For Use With Terminal Block
2660 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 2.004
units
Per unit
Per Pack*
10 +
MYR2.004
MYR20.04
*price indicative
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
The 10 way jumper can have contacts selectively ...
Description:
The 10 way jumper can have contacts selectively broken off to omit some terminals from connection.Jumper bars fit flush into the terminals and are capable of carrying the terminals rated current.For 2-way jumper bar see RS 226-0096 (4mm) or RS ...
The ZMAK 2.5 is a 4 tier DIN ...
Description:
The ZMAK 2.5 is a 4 tier DIN rail mounted terminal allowing the user to connect a 3 phase motor using one single 5mm wide terminal. The terminal consists of 3 levels of feed-through connections, and a fourth level allowing ...