Wago 209 Series Mounting Foot with Screw for Use with Terminal Blocks with mounting flange, IECEx

Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.

• 2 Conductor-through terminal block
• 6 kV surge voltage
• 101-3877 is a mounting foot with screw for DIN 35 rail

Need to bridge the gap between a component and a DIN rail? In steps this mounting foot from Wago. It simply screws onto a terminal block then its fixing flanges clip onto your rail. As this unit comes with a screw, you have the kit on hand to get set up straight away. Removal is a breeze too, as you just unclip the adapter when you want to modify your system.

• Weighs just 1.8g, keeping extra load on your rail to a minimum
• Compact dimensions of 6.4 (W) x 42.3mm (H) take up little space on busy arrangements
• 10 in a pack to keep you well-stocked

• Power supplies
• Control modules
• Process and packaging facilities

A DIN rail is a metal strip that's used to mount components like terminal blocks and circuit breakers in an equipment rack.

When you're installing multiple components with mounting feet onto your rail, it's best to leave a distance of 25 to 30mm between each adapter.

260 Series