Phoenix Contact, End Clamp, E/UK Series

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): FR
Product Details

Universal Terminals

Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.

Individual terminals and complementary accessories

Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U

Approvals

E Exei/II; KEMA

Specifications
Attribute Value
Accessory Type End Clamp
Series E/UK
For Use With NS 32 or NS 35/7.5 DIN rail
Hazardous Area Certification ATEX
1680 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 3.355
units
Per unit
Per Pack*
10 +
MYR3.355
MYR33.55
*price indicative
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
High quality, industry standard terminals designed for mounting ...
Description:
High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 ...
High quality, industry standard terminals designed for mounting ...
Description:
High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 ...